Design has been kept very simple with no attached tanks, pumps, or ropes. The SPEIDEL WEED WIPER consists of a perforated plastic pipe reservoir covered tightly with two layers of a selected absorbent canvas wiping surface, a rate of flow control valve, and clear end liquid level sight. Solution is gravity fed through the holes to soak the entire wiping surface. Flow can be adjusted for thicker or thinner weed densities, faster or slower travel speed, or shut off completely when stopped by regulating the amount of air that can enter the pipe. On the go changes of flow rate can be made with a single valve at the operator's seat.

The SPEIDEL WEED WIPER is the popular standard of performance and simplicity. With greater wiping surface, short wicking distance, and adjustable flow rate, the SPEIDEL WEED WIPER will provide better weed coverage with a weaker solution at a faster speed in a single pass without dripping, thus saving time, chemical cost, and crop damage. The SPEIDEL WEED WIPER has proven to be an effective way to wipe out problem weeds with the simplest design and ease of operation and lowest per acre cost available.

6 ¾ ft., 8 ft., 9 ½ ft., 10 ½ ft.
Combinations provide overlap for common planter widths such as 13 ½ ft., 16 ft., 19 ft., 21 ft., 30 ½ ft., 42½ ft., and 45 ½ ft., or any combination of sections for desired length.

Special sizes made to order for tree plantings, sod farms, orchards, etc.

Hand held models for yard use or spot field use.

Pipe Diameter - 2 inch
Full day average capacity.

Every section is tested for proper operation before shipment from SPEIDEL WEED WIPER

Operating instructions included with each unit.

Long Handle

Mounting is simple and easy on a variety of tractors or implements.
Examples include:

ATV brackets, Tractor loaders, 3 point hitches, High clearance machines, 3 and 4 wheel cycles, Pull type wheel carts, Tractor mounted cultivators, Ride and squirt machines, Sprayer booms, Homemade lift carrier arrangements, Commercially manufactured frames, Hand carried